Sponsored by "Music (random)".
Edited the Ric 4003 bass parts in CE5. Almost there. Some little tweaks left to sort, but I might leave them closer to the final mix. I'm OK for the time being.
Had a bit of a problem with CE5 crashing while I was editing (but not saving). Pain in the bum. Eventually copped that Reaktor 5 Gischt part was eating up a load of processing power, so I recorded it as a stereo audio track using the Phonic Firefly and the Behringer Xenyx 1202 mixer. Problem solved.
Hope to have a go at editing the Squier Strat parts tomorrow. Who knows...?
Regards,
djp
Showing posts with label Gischt. Show all posts
Showing posts with label Gischt. Show all posts
Saturday, January 11, 2014
Saturday, January 4, 2014
Stiltwalker In The Wind - 040114
Sponsored by "X-Ray Spex".
Edited the MIDI drum parts in CE5. Because the parts are sourced from two different VST plugins (HALion One and Kore Player), I had to make sure that the preset reverb settings in both plugins were turned off so that the parts matched. I routed the various parts through a dedicated group channel and applied a reverb setting across all the parts.
I also had a look at the JP Analogue Stringpad parts and decided that the problem lay with the tone itself, so after much trial and error, I settled on HALion One StringsSt2 as an alternative. Works much better now.
I also added a wind tone (Reaktor 5 Gischt) which works very well, but required me to automate a fade in/out. Again much trial and error, but working fine now.
The track is ready for tracking bass and guitar parts next week. That's when the wheels fall off the wagon, I guess...;-).
Regards,
djp
Edited the MIDI drum parts in CE5. Because the parts are sourced from two different VST plugins (HALion One and Kore Player), I had to make sure that the preset reverb settings in both plugins were turned off so that the parts matched. I routed the various parts through a dedicated group channel and applied a reverb setting across all the parts.
I also had a look at the JP Analogue Stringpad parts and decided that the problem lay with the tone itself, so after much trial and error, I settled on HALion One StringsSt2 as an alternative. Works much better now.
I also added a wind tone (Reaktor 5 Gischt) which works very well, but required me to automate a fade in/out. Again much trial and error, but working fine now.
The track is ready for tracking bass and guitar parts next week. That's when the wheels fall off the wagon, I guess...;-).
Regards,
djp
Subscribe to:
Posts (Atom)